DID614

Adjustable twin nozzles

DID614

Four-way active chilled beam for ceiling grid, dimensions 600 × 600 mm and 625 × 625 mm, with horizontal heat exchanger

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems.

Preferably for room heights up to 4.00 m
High heating and cooling capacity with a low conditioned primary air volume flow and low sound power level
High comfort levels due to low airflow velocity in the occupied zone
5 nozzle variants for demand-dependent induction: 4 nozzles each with different opening diameters, 1 twin nozzle with adjustable opening diameters
Removable induced air grille, no tool required
Induced air grille with tapered hole pattern

Optional equipment and accessories

Control system
Adjustable air control blades for air direction control
Different looks due to powder-coated surfaces
With an extended border also suitable for freely suspended installation

Initialize order code

General information

Application

Active chilled beams of Type DID614 for the integration into various ceiling systems, preferably for room heights up to 4.00 m
Particularly suitable for grid ceilings with grid size 600 or 625
Adjustable air control blades (optional) allow for the manual adjustment of the four-way air discharge
Large volume flow rate range due to the adjustable twin nozzles (optional)
2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
Energy-efficient solution since water is used for heating and cooling

Special characteristics

Four-way air discharge
Horizontal heat exchanger as 2-pipe or 4-pipe system
Induced air grille with parallel drilled apertures, decreasing towards the edges
Optional twin nozzles, adjustable, for a large volume flow rate range
Water connection, Ø12 mm Cu pipe or coupling with G1/2" external thread and flat seal or G1/2" union nut and flat seal
Internal nozzle plate with punched nozzles (non-combustible)
Adjustable air control blades for air direction control as an option

Nominal sizes

600, 1200 mm

Variants

Heat exchanger

2: 2-pipe systems
4: 4-pipe systems

Nozzle variants

HE: Small
S1: Medium
S2: Large
HP: Extra large
DA: Adjustable twin nozzles, all nozzles are open (factory setting)
DS: Adjustable twin nozzles, smaller nozzles are open
DB: Adjustable twin nozzles, large nozzles are open. DS and DB can be set according to local requirements. You should order DA and have DS or DB set by others.

Material and surfaces

Casing, spigot, and perforated induced air grille made of galvanised sheet steel
Heat exchanger with copper tubes and aluminium fins
Exposed surfaces are powder-coated, pure white (RAL 9010), or in any other RAL colour
Air control blades made of polypropylene, UL 94, flame retardant (V0)
Steel nozzle plate

Attachments

Adjustable air control blades
Water connection A1: G˝" external thread and flat seal
Water connection A2: G˝" union nut and flat seal

Nominal sizes

600, 1200 mm

Technical information

Function, Technical data, Quick sizing, Specification text, Order Code

Schematic illustration of DID614

1 Fixing brackets

2 Primary air spigot

3 Casing

4 Nozzle plate with punched nozzles

5 Air control blades (optional)

6 Water connections

7 Encasing

8 Heat exchanger

9 Front frame

10 Induced air grille

Functional description

Active chilled beams provide centrally conditioned primary air (outdoor air) to the room and use heat exchangers for additional cooling and/or heating. The primary air flows through the nozzles into the mixing chambers. This induces secondary air. The secondary air flows through the induction grille and the horizontal heat exchanger. There it is heated or cooled. Primary and secondary air mix and are then supplied to the room horizontally through the supply air slots.

Die Schnellauslegungstabelle gibt Betriebspunkte für definierte Bezugsgrößen an. Weitere Betriebspunkte können mit unserem Auslegungsprogramm Easy Product Finder berechnet werden.

Schnellauslegung
Nenngröße 600 × 600, 625 × 625

Düse	ØD	Primärluft q_vPr			LWA [dB(A)]	Kühlen				Heizen
		Primärluft q_vPr				2- und 4-Leiter-System				4-Leiter-System
		[l/s]	[m³/h]	Δp_t [Pa]		Q_ges [W]	Q_WK [W]	Δt_w [kPa]	Δp_w [kPa]	Q_WH = Q_ges [W]	Δt_w [kPa]	Δp_w [kPa]
HE	123	14	50	102	26	552	384	3	1,7	387	6,7	0,1
HE	123	16	58	136	30	615	421	3,3	1,7	414	7,1	0,1
HE	123	19	68	189	35	686	458	3,6	1,7	442	7,6	0,1
S1	123	18	65	64	25	593	375	2,9	1,7	381	6,5	0,1
S1	123	24	86	112	33	735	447	3,5	1,7	432	7,4	0,1
S1	123	31	112	190	41	885	510	4	1,7	479	8,2	0,1
S2	158	20	72	34	21	564	323	2,5	1,7	351	6	0,1
S2	158	34	122	97	36	879	471	3,7	1,7	451	7,8	0,1
S2	158	43	155	156	43	1050	532	4,2	1,7	494	8,5	0,1
HP	158	31	112	37	26	731	356	2,8	1,7	379	6,5	0,1
HP	158	45	162	77	38	998	456	3,6	1,7	444	7,7	0,1
HP	158	50	180	95	41	1085	483	3,8	1,7	462	7,9	0,1
DA	158	23	83	33	18	592	315	2,5	1,7	351	6	0,1
DA	158	40	144	99	35	946	464	3,6	1,7	453	7,8	0,1
DA	158	56	202	196	46	1222	546	4,3	1,7	512	8,8	0,1
DS	158	13	47	93	27	524	367	2,9	1,7	380	6,5	0,1
DS	158	16	58	141	33	614	420	3,3	1,7	420	7,2	0,1
DS	158	19	68	194	38	687	459	3,6	1,7	450	7,7	0,1
DB	158	16	58	33	17	494	300	2,3	1,7	333	5,7	0,1
DB	158	28	101	99	34	794	456	3,6	1,7	445	7,7	0,1
DB	158	39	140	191	43	1006	538	4,2	1,7	507	8,8	0,1

Schnellauslegung
Nenngröße 1200 × 600, 1250 × 625

Düse	ØD	Primärluft q_vPr			LWA [dB(A)]	Kühlen				Heizen
		Primärluft q_vPr				2- und 4-Leiter-System				4-Leiter-System
		[l/s]	[m³/h]	Δp_t [Pa]		Q_ges [W]	Q_WK [W]	Δt_w [kPa]	Δp_w [kPa]	Q_WH = Q_ges [W]	Δt_w [kPa]	Δp_w [kPa]
HE	123	23	83	112	29	883	605	4,7	3,3	610	10,5	0,1
HE	123	25	90	132	31	937	636	5	3,3	636	10,9	0,1
HE	123	30	108	189	37	1062	701	5,5	3,3	692	11,9	0,1
S1	158	28	101	66	26	899	561	4,4	3,3	581	10	0,1
S1	158	37	133	115	35	1133	688	5,4	3,3	674	11,6	0,1
S1	158	48	173	194	43	1374	795	6,2	3,3	756	13	0,1
S2	158	34	122	41	24	948	540	4,2	3,3	569	9,8	0,1
S2	198	34	122	35	20	948	540	4,2	3,3	569	9,8	0,1
S2	158	54	194	104	38	1405	756	5,9	3,3	727	12,5	0,1
S2	198	54	194	88	34	1405	756	5,9	3,3	727	12,5	0,1
S2	158	74	266	195	48	1768	878	6,9	3,3	825	14,2	0,1
S2	198	74	266	166	44	1768	878	6,9	3,3	825	14,2	0,1
HP	158	51	184	47	33	1206	590	4,6	3,3	603	10,4	0,1
HP	198	51	184	34	25	1206	590	4,6	3,3	603	10,4	0,1
HP	158	65	234	75	41	1475	691	5,4	3,3	678	11,7	0,1
HP	198	65	234	55	33	1475	691	5,4	3,3	678	11,7	0,1
HP	158	75	270	100	45	1651	747	5,8	3,3	720	12,4	0,1
HP	198	75	270	73	37	1651	747	5,8	3,3	720	12,4	0,1
DA	158	39	140	40	24	937	468	3,7	3,3	535	9,2	0,1
DA	198	39	140	32	< 20	937	468	3,7	3,3	535	9,2	0,1
DA	158	60	216	95	37	1399	676	5,3	3,3	670	11,5	0,1
DA	198	60	216	76	32	1399	676	5,3	3,3	670	11,5	0,1
DA	158	80	288	168	46	1756	792	6,2	3,3	752	12,9	0,1
DA	198	80	288	135	42	1756	792	6,2	3,3	752	12,9	0,1
DS	158	23	83	99	29	878	600	4,7	3,3	612	10,5	0,1
DS	198	23	83	90	26	878	600	4,7	3,3	612	10,5	0,1
DS	158	27	97	135	34	990	665	5,2	3,3	657	11,3	0,1
DS	198	27	97	123	31	990	665	5,2	3,3	657	11,3	0,1
DS	158	32	115	189	39	1116	731	5,7	3,3	705	12,1	0,1
DS	198	32	115	173	36	1116	731	5,7	3,3	705	12,1	0,1
DB	158	26	94	34	22	743	428	3,3	3,3	502	8,6	0,1
DB	198	26	94	30	< 20	743	428	3,3	3,3	502	8,6	0,1
DB	158	45	162	101	36	1224	682	5,3	3,3	686	11,8	0,1
DB	198	45	162	88	33	1224	682	5,3	3,3	686	11,8	0,1
DB	158	63	227	198	45	1571	811	6,3	3,3	788	13,6	0,1
DB	198	63	227	173	43	1571	811	6,3	3,3	788	13,6	0,1

Bezugsgrößen

Parameter	Kühlen	Heizen
t_R	26 °C	22 °C
t_Pr	16 °C	22 °C (isotherm)
t_WV	16 °C	50 °C
qv_W	110 l/h	50 l/h

Variants, Product details

DID614: 593 x 593/LE

Downloads

product information

Product Data Sheet Type DID614

DID614_PD_2023_08_29_DE_en Product Data Sheet 2,5 MB pdf

certificates

Declaration of hygiene conformity Type DID614

DDID614_HC_2024_05_DE_en Hygiene certificate 1,7 MB pdf
Eurovent Certita Certification Active and Passive Chilled Beams

Active-and-Passive-Chilled-Beams_CE_EUROVENT_09.12.432_2023_09_DE_en_fr Certificate 200 KB pdf
Non-CE Manufacturer's statement DID614

DID614_NotCE_2022_02_08_14_12_24_DE_en Certificate 1,7 MB pdf

operation manuals

Installation manual Type DID614

DID614_IM_CD10077_V1_2024_04_GB_en Installation manual 1,3 MB pdf

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

Type	DID614 – Active chilled beam
Design variant	Round perforated metal plate, encased
Heat exchanger	4-pipe
Nozzle variant	Standard, small
Position of water connection	right
Water connection	with G½" union nut, flat seal
Overall dimensions [mm]	Length 593, width 593
Primary air spigot diameter [mm]	123
Exposed surface	powder-coated, RAL 9016 (traffic white)
Air control blades	with air control blades

DID614

Four-way active chilled beam for ceiling grid, dimensions 600 × 600 mm and 625 × 625 mm, with horizontal heat exchanger

General information

Technical information

Function, Technical data, Quick sizing, Specification text, Order Code

Variants, Product details

Downloads

product information

Product Data Sheet Type DID614

certificates

Declaration of hygiene conformity Type DID614

Eurovent Certita Certification Active and Passive Chilled Beams

Non-CE Manufacturer's statement DID614

operation manuals

Installation manual Type DID614

TROX Services

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE