FBA

FBA-3

Deburred, black lacquered, visible side turned over

FBA-3-*-SM

Adjustable dirt trap

FBA-4-*-KF

Trim ring with spring clip fixing

FBA-1-VF

With swirl element to adjust the air flow

Round aluminium air diffusers for installation in floors

The different attachments allow a wide range of applications with different air flows, installation conditions and several options for volume flow balancing.

Nominal sizes: 150, 200 mm
Volume flow range 1 - 59 l/s or 4 - 213 m³/h
Annular diffuser contour with different surface structures
For constant and variable volume flows
For all types of raised floors
Horizontal or vertical air flow
Reduction element adjustable on the front or rear side
Can be installed with and without trim ring
The trim ring allows quick and easy installation and removal of the grille inserts for cleaning purposes
High mechanical strength/breaking resistance > 17 kN
Ideal for comfort zones

Optional equipment and accessories

Swirl unit adjustable at the back for manual adjustment between vertical and horizontal air routing
Trim ring with spring clip fixing to cover the installation opening
Dirt trap can also be used as a reduction element
Plenum box

Allgemeine Informationen

Application

Floor diffusers as supply air diffusers for comfort areas
Installation in raised floors without plenum box if it is constructed as a pressurised floor
Installation in raised floors with plenum box to allow individual ventilation in rooms or zones
Vertical supply air flow, with adjustable swirl unit also horizontal air flow
Variants with adjustable swirl units can be manually set to vertical or horizontal air routing
Attractive design element with various types of surfaces, for building owners and architects with demanding aesthetic requirements
Comfortable and energy-efficient airflow through supporting convection currents in the occupied zone
Thermal loads are effectively dissipated
For constant and variable volume flows
For supply air temperature differences of –12 - +20 K

Special characteristics

Simple and quick assembly and covering of the installation opening when used with trim ring and spring clip fixing
Installation in hard flooring requires a spacing ring The spacing ring is included in the delivery if no trim ring has been selected
High crush resistance > 17 kN
The grille insert is torsion-proof and centred in combination with trim ring
With or without swirl unit to allow for various air patterns
A dirt trap reduces contamination of the floor and facilitates volume flow rate balancing. It can be adjusted from the diffuser front and back surface

Nominal sizes

150, 200

Variants

Setting the air flow direction

-*: no entry: vertical air flow, inalterable
-V: preset vertical swirling airflow, the swirl vane is manually adjustable
-H: preset horizontal swirling airflow, the swirl vane is manually adjustable

Installation

-*-: Floor diffuser with spacing ring
-KF: Floor diffuser with trim ring and spring clip fixing

Dirt trap

-*: no entry: without dirt trap
-SM: with adjustable dirt trap Dirt trap adjustable on the back, the dirt trap can also serve as a reduction element for volume flow rate balancing
-SV: with adjustable dirt trap Dirt trap adjustable from the diffuser face front, the dirt trap can also serve as a reduction element for volume flow rate balancing

Plenum box

-*: no entry: without plenum box
-A: with plenum box for connection to the on-site air duct system

Construction

Surface floor diffuser (floor grille and trim ring)

-1: Deburred diffuser core
-3: Deburred diffuser core, painted black, exposed surface overtightened
-4: Deburred diffuser core, exposed surface overtigthened

Parts and characteristics

Grille insert Floor diffuser

Ring spacing: 6 mm
Height-adjustable dirt trap which serves as a reduction element for volume flow rate balancing
Adjustable swirl unit for vertical or horizontal swirling air flow or air routing

Trim ring with spring clip fixing

Rotation lock and centring grille insert
Covers the installation opening
Spring clip fixing enables different magnitude of the raised floor and the compensation of large cut-out tolerances when creating the installation openings. For the tightest possible fit of the trim ring, we recommend the minimum installation dimension
Balancing with soft flooring, e.g. carpetWorks well with soft flooring, e.g. carpet

Attachments

Spacing ring to hold the grille insert for variants without trim ring
Trim ring with spring clip fixing to accommodate the grille insert and to attach the installation opening
Adjustable swirl unit for vertical or horizontal swirling air flow
Fixed swirl unit for vertical air flow (only for nominal size 200)
Height-adjustable dirt trap which also serves as a reduction element for volume flow rate balancing

Accessories

Plenum box -A:

For direct connection to the on-site air duct system
With incorporated air distribution element for a steady flow to the floor diffuser
Plenum box suitable for all nominal sizes

Material

Grille insert and trim ring made of die-cast aluminium
Spring clips made of stainless steel
Adjustable swirl unit and dirt trap made of ABS plastic, UL94-V-0
Spacing ring made of plastic ABS UL 94-V-0
Dirt trap adjustment device and connective marterial made of galvanised steel
Plenum box made of galvanised sheet steel

Technical data

Nominal sizes: 150, 200 mm
Volume flow rate range: 1 – 59 l/s or 4 – 213 m³/h
Supply air temperature difference: -12 - +20 K
Crush resistance > 17 kN

Technical information

Function, Technical data, Quick sizing, Specification text, Order code

Schematische Darstellung

A FBA-...-KF

B FBA

C FBA-...-KF-A

1 Frontdurchlass

2 Gehäuse mit Klemmflansch und Klemmfedern

3 Ausgleichsring

Optional

4 Schmutzfangkorb

5 Anschlusskasten

6 Bodenplatte (bauseitig)

Floor diffusers allow supply air in mechanical ventilation and air conditioning systems to flow into the room from below or from the floor. For adaptation to different local conditions, 3 different variants of the air routings are possible.

Vertical flow without adjustment option

Without adjustable swirl unit, the supply air flows vertically into the room at a moderate speed. Since cold air is heavier than warm air, the direction of flow reverses and the supply air flows back towards the floor. A low-turbulence or swell-like flow spreads over the entire floor surface. A lift current forms at heat sources such as people and equipment, so that the air is primarily exchanged in these areas.
This type of hybrid ventilation or mixed-source ventilation is designed exclusively for cooling operation. It is particularly suitable for rooms with a clear division between circulation and occupied areas. These include, for instance, cinema or theatre halls and waiting areas. The maximum supply air temperature difference should not exceed -6 K. The exhaust air should be dissipated in the upper part of the room, above the occupied zone.

Horizontal air flow

An adjustable swirl unit set for vertical flow causes a swirling vertical supply air flow into the room. In doing so, the supply air induces room air near the floor surface and quickly reduces the air velocity as well as the temperature difference between supply air and room air. This type of mixed ventilation is particularly suitable for areas that are permanently intended for people to remain. This includes, for instance, office spaces or meeting and conference rooms.

Vertical swirling air flow

An adjustable swirl blade set for vertical flow causes a swirling vertical supply air flow into the room. Through this process, the supply air induces room air. There is a rapid reduction in flow velocities and a quick reduction of the temperature difference between supply air and room air. This type of mixed ventilation results in proficient room ventilation. It is particularly suitable for areas in which people do not remain for longer periods of time. This includes corridors or similar circulation areas.

Nominal sizes	150, 200 mm
Volume flow rate range	1 – 59 l/s or 4 – 213 m³/h
Supply air to room air temperature difference	-12 to +20 K
Crush resistance	> 17 kN

The quick lay-out provides a proficient overview of the possible volume flow rates, the corresponding sound power levels and pressure differences with horizontal air flow. The minimum volume flow rates apply to a supply air temperature difference of -6 K. The maximum volume flows apply to a sound power level of approx. 50 dB(A) Exact values for all parameters can be determined with our Easy Product Finder design program.

Diffuser only

NS	q_v		Δp_t	L_wA
NS	l/s	m³/h	Pa	dB(A)
150	1	4	0	< 15
	12	43	15	23
	24	86	58	40
	36	128	129	50
200	1	4	0	< 15
	20	73	11	19
	40	143	43	39
	59	213	96	50

With plenum box

NS	q_v		Δp_t	L_wA
NS	l/s	m³/h	Pa	dB(A)
150	1	4	0	< 15
	14	50	16	25
	28	100	62	41
	41	149	138	50
200	1	4	0	< 15
	19	70	10	18
	38	137	38	38
	57	205	86	50

With dirt trap

NS	q_v		H₄ = maximum		H₄ = 45		H₄ = 35
	q_v		Δp_t	L_wA	Δp_t	L_wA	Δp_t	L_wA
	l/s	m³/h	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)
150	1	4	0	< 15	0	< 15	0	< 15
	12	44	14	22	16	19	19	23
	24	87	56	40	63	41	73	43
	36	130	125	50	142	53	162	55

NS	q_v		H₄ = maximum		H₄ = 50		H₄ = 40
	q_v		Δp_t	L_wA	Δp_t	L_wA	Δp_t	L_wA
	l/s	m³/h	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)
200	1	4	0	< 15	0	< 15	0	<15
	19	70	10	18	12	19	13	18
	38	137	38	38	45	39	52	39
	57	205	86	50	101	50	116	52

With plenum box and dirt trap

NS	q_v		H₄ = maximum		H₄ = 45		H₄ = 35
	q_v		Δp_t	L_wA	Δp_t	L_wA	Δp_t	L_wA
	l/s	m³/h	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)
150	1	4	0	< 15	0	< 15	0	< 15
	13	47	14	22	16	20	19	24
	26	94	54	40	63	42	73	44
	39	140	121	50	140	55	163	56

NS	q_v		H₄ = maximum		H₄ = 50		H₄ = 40
	q_v		Δp_t	L_wA	Δp_t	L_wA	Δp_t	L_wA
	l/s	m³/h	Pa	dB(A)	Pa	dB(A)	Pa	dB(A)
200	1	4	0	< 15	0	< 15	0	< 15
	18	64	13	20	14	20	16	20
	35	126	49	39	55	39	61	39
	52	188	110	50	123	50	135	51

Specification text

General information:

Floor diffusers as supply air diffusers for installation in raised floors of all types. Supply air supply either directly via the raised floor if it is construceted as a pressurised floor, or via a plenum box connected to the on-site air duct system.

Diffuser core with curved mullions made of diecast aluminium.

Installation:

With stepped spacing ring made of ABS UL94-V-0 plastic for precise installation in the raised floor
With trim ring and spring clip fixing for easy ASSEMBLAGE with various base plate magnitude from 10 mm. Made of die-cast aluminium, the component centres the grille insert and simultaneously secures it from twisting

Air flow direction:

Without adjustable swirl unit for vertical air flow
With adjustable swirl unit (ABS plastic, UL94-V-0) for vertical or horizontal air flow (factory settings can be changed) If required, the swirl vane can be adjusted manually

Dirt trap:

Without dirt trap, which can be used as a reduction element for volume flow balancing
With dirt trap (ABS plastic, UL94-V-0) that also serves as a reduction element for volume flow rate balancing

Plenum box:

Without plenum box for installation in pressurised floor
With plenum box made of galvanised sheet steel; plenum box with Ø 123 mm spigot for connection to the air duct system With incorporated air distribution element for a steady flow to the floor diffuser

Equivalence criteria

2 nominal sizes [mm]

3 surface textures

Floor diffuser deburred
Floor diffuser deburred, black lacquered, visible side overtightened
Floor diffuser deburred, visible side overtightened

Volume flow rate range

1 – 59 l/s or 4 – 213 m³/h

Supply air temperature difference

-12 to +20 K

Crush resistance

> 17 kN

FBA

–

150

1 Type
FBA Floor diffuser

2 Surface floor diffuser (grille core and trim ring)
1 deburred
3 deburred, painted black, exposed surface skimmed
4 deburred, exposed surface skimmed

3 Airflow direction
No entry: vertical
V vertical, adjustable swirl unit
H horizontal, adjustable swirl unit

4 Installation
No entry: spacing ring for stepped holes
KF Trim ring and spring clips

5 Dirt trap
No entry: without dirt trap
SM flow rate adjustment on the rear side
SV flow rate adjustment on the front side

6 Plenum box
No entry: without plenum box
A with plenum box

7 Nominal size [mm]
150, 200

Order example: FBA-3-V-KF-SM-A/150

Type	FBA
Surface of diffuser core and trim ring	Deburred, painted black, exposed surface skimmed
Airflow direction	Vertical, adjustable swirl unit
Installation	Trim ring with spring clips
Dirt trap	Flow rate adjustment from the underside
Plenum box	With plenum box
Nominal size [mm]	150

Variants, Product details

FBA-1

Surface of grille insert and clamping flange deburred

Dirt trap setting for volume flow balancing

For flow rate balancing (adjusting reduction), the height H₄ is changed between the upper edge of the dirt trap and the lower edge of the floor grille.

Installation in pressurised floors without plenum box
Plan plenum boxes for rooms with individual volume flows and/or supply air temperatures
For raised floors (from 10 mm panel magnitude) with carpet coverings, use floor diffusers with trim ring for better edge protection
Trim rings are suitable for compensating tolerances when creating the installation opening. A particularly tight fit is achieved when the minimum dimension of the installation opening is realised
By installation without a trim ring in a stepped bore, use the supplied spacing ring to ensure the function and height compensation
Variants with adjustable twist element can be adjusted manually. Setting position H provides a horizontal supply air flow, setting position V provides a vertical supply air flow

The schematic diagrams are provided to illustrate installation details.

Downloads

product information

Product data sheet FBA

FBA_PD_2024_02_12_DE_en Product data sheet 9,9 MB pdf

certificates

Declaration of hygiene conformity FBA

FB-A_HC_2020_06_08_DE_en Certificate 2,1 MB pdf
Non-CE Manufacturer's statement FBA

FBA_NotCE_2022_02_08_14_28_11_DE_en Certificate 1,9 MB pdf

operation manuals

Assembly instructions FBA

FB-A_CD10083_V1_2024_07_GB_en Assembly instructions 1,9 MB pdf
Installation Instruction Manual FBA

Installation-Manual-FB_EN Installation Instruction Manual 250 KB pdf

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

FBA

Round aluminium air diffusers for installation in floors

Allgemeine Informationen

Technical information

Function, Technical data, Quick sizing, Specification text, Order code

Variants, Product details

Downloads

product information

Product data sheet FBA

certificates

Declaration of hygiene conformity FBA

Non-CE Manufacturer's statement FBA

operation manuals

Assembly instructions FBA

Installation Instruction Manual FBA

TROX Services

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE