X-GRILLE Basic

X-GRILLE-Basic

Flat border construction

X-GRILLE BASIC

Ventilation grilles with flat border construction – also for continuous horizontal runs

The new X-GRILLE Basic ventilation grilles with their gently sloped border combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

Nominal sizes 225 × 125 – 1225 × 525 mm
Volume flow rate range 19 – 2651 l/s or 68 – 9544 m³/h
Energy-efficient and acoustically optimised air discharge
Symmetric blade profile for two-way entry flow
Uniform look and easy adjustment due to concealed blade linkage
Gently sloped border construction, almost completely flush with the installation surface
Linear look, ideal for continuous horizontal runs
Use of existing rear assemblies
Easy replacement of existing grilles due to standard installation dimensions

Optional equipment and accessories

Installation subframe
Attachments for volume flow rate balancing and air direction control
Concealed screw fixing
Spring clip fixing

Initialize order code

Application

Application

Ventilation grille of Type X-GRILLE Basic as supply air or extract air variant for comfort zones and industrial zones
Attractive design element for building owners and architects with demanding aesthetic requirements
Directed supply air discharge for mixed flow ventilation
Blades are adjustable to meet different local requirements
For variable and constant volume flows
For supply air to room air temperature differences from –12 to +4 K
For installation in walls, sills and rectangular ducts

Special characteristics

Symmetric blade profile for two-way entry flow
Concealed blade linkage for adjusting the blades simultaneously
Gently sloped border construction, almost completely flush with the installation surface
Linear look, ideal for continuous horizontal runs

Nominal sizes

Single grille

Nominal length: 225, 325, 425, 525, 625, 825, 1025, 1225 mm
Nominal height: 125, 225, 325, 425, 525 mm

Horizontal run section

Nominal length of end section: 950 – 2025 mm
Nominal length of middle section: 2000 mm
Nominal height: 125, 225, 325 mm

Other dimensions upon request

Description

Variants

Single grille
Horizontal run section

Fixing

VS: Concealed screw fixing
KF: Spring clip fixing

VS, KF only with installation subframe

Parts and characteristics

Gently sloped border
Horizontal blades with concealed linkage to adjust blades simultaneously
Vertical centre mullion for nominal lengths over 625 mm
Concealed screw fixing and spring clip fixing, optional

Attachments

AG, AS, D, DG: For volume flow rate balancing and for air direction control

Accessories

Installation subframe: For the fast and simple installation of ventilation grilles

Construction features

Only small clearance between blades and border
Centrally supported blades

Materials and surfaces

Border made of galvanised sheet steel
Blades made of aluminium
Linkage and end pieces for blades made of highly temperature resistant special plastic, flame retardant to UL 94, V-0
Border and blades powder-coated RAL 9010, pure white
P1: Powder-coated, RAL CLASSIC colour

Standards and guidelines

Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

Maintenance-free as construction and materials are not subject to wear
Inspection and cleaning to VDI 6022

Technical information

Function, Technical data, Quick sizing, SPECIFICATION TEXT, Order code

Schematic illustration of a ventilation grille with longitudinal blades

① Front border
② Longitudinal blades
③ Centre mullion

Functional description

Ventilation grilles are air terminal devices for the supply air and extract air of ventilation and air conditioning systems. They direct the supply air into the room. Ventilation grilles with adjustable blades allow for adapting the discharge direction to the local conditions. The result is a mixed flow ventilation in comfort zones and industrial zones, with good overall room ventilation.

Induction slows the airflow down, i.e. the airflow velocity decreases as the distance from the grille increases. The distance at which the airflow velocity reaches a certain defined value, e.g. 0.2 m/s, is called throw distance. The supply air jet from wall grilles that are installed near the ceiling achieves a larger throw distance than a free jet (from a grille that is not installed near the ceiling). Single grilles, groups of grilles and continuous horizontal runs all achieve different throw distances.

In cooling mode it is necessary to take account of the jet deviation towards the occupied zone, which increases as the supply air to room air temperature difference increases and the discharge velocity decreases. In heating mode the supply air jet deviates towards the ceiling. This has no negative effect on the airflow velocity in the occupied zone, but it may affect the complete ventilation of the room.

Nominal sizes	225 × 125 to 1225 × 525 mm
Horizontal run section	H: 125, 225, 325 mm
Minimum volume flow rate	16 – 568 l/s or 58 – 2045 m³/h
Maximum volume flow rate, with L_WA max. 40 dB(A) without attachments	97 – 2651 l/s or 350 – 9544 m³/h
Supply air to room air temperature difference	–12 to +4 K

Volumen flow rates for single grille for supply air.

Geometric free area

H	L [mm]
H	225	325	425	525	625	825	1025	1225
H	A_geo
mm	m²
125	0.013	0.019	0.026	0.032	0.037	0.051	0.064	0.077
225	0.025	0.038	0.051	0.064	0.073	0.103	0.129	0.155
325		0.057	0.077	0.096	0.109	0.154	0.193	0.232
425			0.102	0.128	0.146	0.206	0.258	0.310
525				0.160	0.182	0.257	0.322	0.387

X-GRILLE Cover, X-GRILLE Basic, volume flow rate ranges 00144329_0

× L_WA = 40 dB(A) with unrestricted airflow+ L_WA = 40 dB(A) with airflow restricted by 50 %

Ventilation grilles with gently sloped border, rectangular, for supply and extract air. Function combined with an appealing design. Gently sloped border. Preferably for wall and sill installation but also suitable for rectangular ducts.

Ready-to-install component which consists of a border and symmetrically and aerodynamically profiled, horizontal blades with a concealed linkage that allows for adjusting the blades simultaneously.

Special characteristics

Symmetric blade profile for two-way entry flow
Concealed blade linkage for adjusting the blades simultaneously
Gently sloped border construction, almost completely flush with the installation surface
Linear look, ideal for continuous horizontal runs

Materials and surfaces

Border made of galvanised sheet steel
Blades made of aluminium
Linkage and end pieces for blades made of highly temperature resistant special plastic, flame retardant to UL 94, V-0
Border and blades powder-coated RAL 9010, pure white
P1: Powder-coated, RAL CLASSIC colour

Technical data

Nominal sizes: 225 × 125 to 1225 × 525 mm
Horizontal run section, height: 125, 225, 325 mm
Minimum volume flow rate (supply air): 16 – 568 l/s or 58 – 2045 m³/h
Maximum volume flow rate (supply air), at L_WA max. 40 dB(A) without attachments: 97 – 2651 l/s or 350 – 9544 m³/h
Supply air to room air temperature difference: –12 to +4 K

Sizing data

V _______________________ [m³/h]
Δp_t _______________________ [Pa]

Air-regenerated noise

L_WA _______________________ [dB(A)]

This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme.

Life cycle assessment
A life cycle assessment is available for the product series in form of an Environmental Product Declaration (EPD) that has been checked and published by a programme holder.

Type
X-GRILLE-Basic Single grille

Attachments
A       Without (grille face only)
AG       Damper unit, opposed action blades
AS       Hit and miss damper
D       Air direction control, blades installed at 90° to the front blades, independently adjustable
DG       D combined with AG

Nominal size [mm]
L × H

Installation subframe
       VS, KF only with installation subframe
       No entry: none
B1       With

Fixing
VS       Concealed screw fixing
KF       Spring clip fixing
KB       Without fixing material
       VS, KF only with installation subframe

Surface
No entry: powder-coated RAL 9010, pure white
P1 Powder-coated, RAL ... CLASSIC

       Gloss level
       RAL 9010 50 %
       RAL 9006 30 %
       All other RAL colours 70 %

Order example: X-GRILLE-Basic-AG/525×225/B1/VS/P1-RAL 9016

Attachments	Damper unit, opposed action blades
Nominal size	525 × 225 mm
Installation subframe	With installation subframe
Fixing	Concealed screw fixing
Surface	RAL 9016, traffic white, gloss level 70 %

Order example: X-Grille-Basic-E-R-AG/1025×225/D1/VS

Section	End section
End section	Right end section
Attachments	Damper unit, opposed action blades
Nominal size	1025 × 225
Installation subframe	For end section
Fixing	Concealed screw fixing
Surface	RAL 9010, pure white, gloss level 50 %

Dimensions and weight, Product details

X-GRILLE Basic, 26 mm wide front border

L Nominal length Vertical centre mullion if L > 625 mm
H Nominal height

The weight table shows the available nominal sizes

X-GRILLE Basic, single grille

H	L [mm]
H	225	325	425	525	625	825	1025	1225
H	m
mm	kg
125	0.5	0.6	0.8	0.9	1.1	1.4	1.7	2.0
225	0.8	1.0	1.2	1.5	1.7	2.2	2.7	3.1
325		1.4	1.7	2.0	2.3	3.0	3.7	4.3
425			2.2	2.6	3.0	3.9	4.7	5.5
525				3.1	3.6	4.8	5.7	6.7

Weights apply to ventilation grilles without attachments

X-GRILLE Basic for continuous horizontal runs

H	Section
H	E	M
mm	kg/m	kg
125	1.6	3.2
225	2.6	5.2
325	3.6	7.2

Middle section M: 2000 mm

End section E: 950 – 2025 mm in increments of 1 mm

Weights apply to sections without attachments

Front border – longitudinal section (L), 28 mm

Installation examples, Installation details, Commissioning, Basic information and nomenclature

Wall installation 00153815_0

Nominal length up to 625 mm: without vertical centre mullion

Ventilation grille with concealed screw fixing

① Installation subframe
② Concealed screw fixing
③ Ventilation grille

Installation and commissioning

Installation preferably in walls, sills and rectangular ducts
Installation with installation subframe is recommended

These are only schematic diagrams to illustrate installation details.

Volume flow rate balancing -*G

Attachments -AG, -DG and Types AGW, DGW

Volume flow rate balancing

When several ventilation grilles are installed on the same duct, it may be necessary to balance the volume flow rates.

AG: Damper unit with opposed action blades, adjustable, secured with a locking screw
AS: Damper unit with hit and miss damper, adjustable, secured with a locking screw

Air pattern

Adjustable blades: Set the air control blades individually or together and depending on the local conditions
D, DG: Air control blades, fitted at 90° to the front blades, can be adapted to the local conditions

Principal dimensions

L [mm]

Nominal length of the ventilation grille

H [mm]

Nominal height of the ventilation grille

m [kg]

Weight

Nomenclature

L_WA [dB(A)]

Sound power level of the air-regenerated noise

V [m³/h] and [l/s]

Volume flow rate

Δp_t [Pa]

Total differential pressure

l_S [m]

Distance from single grille or horizontal run section (throw distance)

Downloads

product information

Product data sheet Type X-Grille Basic

Product data sheet 2,1 MB pdf

certificates

Declaration of hygiene conformity Type X-GRILLE Basic

Hygiene certificate X-GRILLE-Basic_HC_2020_06_08_DE_en 950 KB pdf
Environmental Product Declaration X-GRILLE-Basic

X-GRILLE-Basic_EPD_2024_03_DE_en Environmental Product Declarations 380 KB pdf
Non-CE Manufacturer's statement X-GRILLE Basic

X-GRILLE-Basic_NotCE_2022_02_08_14_33_31_DE_en Certificate 950 KB pdf

operation manuals

Installation manual X-Grille Basic/Cover

X-GRILLE_IM_A00000037650_V2_2022_03_GB_en Installation manual 800 KB pdf

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistics and analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely or how people navigate between web pages. All information used by third parties is aggregated and anonymised.

X-GRILLE BASIC

Ventilation grilles with flat border construction – also for continuous horizontal runs

Application

Description

Technical information

Function, Technical data, Quick sizing, SPECIFICATION TEXT, Order code

Dimensions and weight, Product details

Installation examples, Installation details, Commissioning, Basic information and nomenclature

Downloads

product information

Product data sheet Type X-Grille Basic

certificates

Declaration of hygiene conformity Type X-GRILLE Basic

Environmental Product Declaration X-GRILLE-Basic

Non-CE Manufacturer's statement X-GRILLE Basic

operation manuals

Installation manual X-Grille Basic/Cover

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE