X-AIR-PCASE230V

X-AIRCONTROL

X-AIR-PCASE230V

X-AIR-PCASE230V ENCLOSURE FOR ONE ZONE MODULE OR ONE ZONE MASTER.

X-AIRCONTROL enclosure for the fitting (by others) of a zone module or a zone master in a zone (room)

24 V AC power supply to the zone module or zone master through an integral transformer
Connection of 230 V AC and looping through with 4-wire double terminals
Optional fitting of an X-SENS-SPLITTER four-way splitter
Pre-wired

General information

Application

Type X-AIR-PCASE230V enclosure for the fitting of a zone module or zone master
Voltage supply to a zone module or a zone master and any connected components, such as volume flow controllers, valve actuators or sensors
For the fitting of an X-SENS-SPLITTER four-way splitter
Wall installation
Ceiling installation (optional)

Special features

Simple wall installation thanks to removable mounting bracket
Simple installation of a zone module or zone master and the four-way splitter X-SENS-SPLITTER thanks to integral DIN mounting rails
Transformer 230 V/24 V AC, including micro fuse, installed and wired
Supply voltage connection and looping through with 4-wire double terminals
The enclosure is delivered without a zone module or zone master

Parts and characteristics

For supply voltage 230 V AC, 50 Hz
4-wire double terminals for looping through (L1/N/PE)
Transformer with micro fuse 230 V AC to 24 V AC
Integral mounting rail
2-pole connection plug to connect a zone module or zone master to the supply voltage
Integral strain relief
Bracket for wall installation

Useful additions

Zone modules X-AIR-ZMO-MP, X-AIR-ZMO-MOD or X-AIRZMO-ANA
X-AIR-ZMAS zone master module
Four-way splitter X-SENS-SPLITTER
X-AIR-PCASE-C optional mounting bracket for ceiling installation of X-AIR-PCASE230V

Materials and surfaces

Casing in ABS plastic, UL 94 V-0
Grey, RAL 7037

Maintenance

Maintenance-free as construction and materials are not subject to wear
Inspection and cleaning; regular cleaning from dust is recommended

Technical information

The X-AIR-PCASE230V enclosure is used for the fitting of a zone module or zone master. The X-AIR-PCASE230V enclosure comes with two integral mounting rails for a zone module / zone master, a four-way splitter X-SENS-SPLITTER and other omponents. The enclosure is made of ABS plastic. A pre-wired transformer in the X-AIR-PCASE230V supplies the zone module or the zone master via a two-pole connection plug with 24 V AC. The transformer has a micro fuse. As standard, the X-AIRPCASE230V comes with a mounting bracket with four fixing holes (Ø5 mm) for wall installation. If you need to fix X-AIRPCASE230V to a ceiling, use the X-AIR.PCASE-C mounting bracket (accessory). The X-AIR-PCASE230V is delivered without a zone module, zone master or X-SENS-SPLITTER. These have to be installed on site, by others. 3 x 4-wire feed-through terminal blocks L1/N/PE are provided for the connection of the supply voltage. Cables can be fed through the rubber membranes at the side. The lid of the X-AIR-PCASE230V is secured with a safety device that prevents it from being opened by unauthorised persons. It can only be opened with a Phillips screwdriver.

Supply voltage	230 V AC ±10%, 50 Hz
Power consumption (transformer)	35 VA max.
Micro fuse (transformer)	T250 mA (Ø5 × 20 mm, EN 60127-2/III)
Connection (spring-loaded terminals, 2.5 mm² max.)	4-wire double terminals
Temperature – operation	-10 to 40 °C
Temperature – storage	-20 to 50 °C
Protection level	IP 20 (EN 60529)
IEC protection class	I (protective earth)
Installation location	Wall or ceiling installation (optional)
Dimensions with wall mounting bracket (B × T × H)	Approx. 282 × 267 × 155 mm with closed lid, approx. 282 × 300 × 380 mm with open lid
Dimensions with ceiling mounting bracket (B × T × H)	Approx. 282 × 330 × 150 mm with closed lid, approx. 282 × 330 × 380 mm with open lid
Enclosure	ABS plastic, UL 94 V-0, grey (RAL 7037)
Weight	Approx. 2700 g

This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design program.

The X-AIR-PCASE230V enclosure is used for the fitting of a zone module or zone master. The enclosure is a plastic casing made of ABS. As standard, PCASE230V comes with a mounting bracket for wall installation. The mounting bracket has 4 holes (Ø5 mm) so that you can screw-fix it to the wall. If you need to fix the enclosure to a ceiling, use the X-AIR.PCASE-C mounting bracket (accessory). The X-AIR-PCASE230V is intended for use with a zone master or zone module and fitted with two mounting rails for installation. The X-AIR-PCASE230V is delivered without a zone module, zone master or splitter. These have to be installed on site, by others. 3 x 4-wire feed-through terminal blocks L1/N/PE are provided for the connection of the supply voltage. A 230 V/24 V AC transformer including micro fuse for supplying voltage to the various components is factory installed and wired. Cables can be fed through the rubber membranes at the side. The lid of the X-AIR-PCASE230V is secured with a safety device that prevents it from being opened by unauthorised persons. It can only be opened with a Phillips screwdriver.

Special features

Simple wall installation thanks to removable mounting bracket
Simple installation of a zone module or zone master and the four-way splitter X-SENS-SPLITTER thanks to integral DIN mounting rails
Transformer 230 V/24 V AC, including micro fuse, installed and wired
Supply voltage connection and looping through with 4-wire double terminals
The enclosure is delivered without a zone module or zone master

Materials and surfaces

Casing in ABS plastic, UL 94 V-0
Grey, RAL 7037

Technical data

Supply voltage: 230 V AC ±10%, 50 Hz
Power consumption (transformer): 35 VA max.
Micro fuse (transformer): T250 mA (Ø5 × 20 mm, EN 60127-2/III)
Connection (spring-loaded terminals, max. 2.5 mm²: 4-wire double terminals
Temperature – operation: -10 – 40°C
Temperature – storage: -20 – 50°C
Degree of protection: IP20 (EN 60529)
IEC protection class: I (protective conductor)
Dimensions with wall mounting bracket (B × T × H): approx. 282 × 267 × 155 mm with closed lid, approx. 282 × 300 × 380 mm with open lid
Dimensions with ceiling mounting bracket (B × T × H): approx. 282 × 330 × 150 mm with closed lid, approx. 282 × 330 × 380 mm with open lid
Casing: ABS plastic, UL 94 V-0, grey (RAL 7037)
Weight: Approx. 2700 g

X-AIR-PCASE230V

1 Type
X-AIR-PCASE230V

Useful additions
X-AIR ZMO-ZMAS Zone master
X-AIR ZMO MOD Modbus RTU zone module
X-AIR-ZMO-ANA Analogue zone module
X-SENS-SPLITTER Four-way splitter

X-AIR-PCASE-C Ceiling mounting bracket

Downloads

product information

Product data sheet X-AIR PCASE230V

X-AIR-PCASE-230V_PD_2021_08_18_DE_en Product data sheet 510 KB pdf

certificates

EU Konformitätserklärung / EU Declaration of conformity X-AIR-PCASE230V

CE_2018_04_X-AIR-PCASE_de_en_fr EU Konformitätserklärung / EU Declaration of conformity 46 KB pdf

operation manuals

Montageanleitung / Installation manual X-AIR-PCASE230V

IM_2018_03_A00000064766_X-AIR_PCASE230V_V1_DE_de_en Installation manual 460 KB pdf

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistics and analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely or how people navigate between web pages. All information used by third parties is aggregated and anonymised.

X-AIR-PCASE230V

X-AIR-PCASE230V ENCLOSURE FOR ONE ZONE MODULE OR ONE ZONE MASTER.

General information

Technical information

Downloads

product information

Product data sheet X-AIR PCASE230V

certificates

EU Konformitätserklärung / EU Declaration of conformity X-AIR-PCASE230V

operation manuals

Montageanleitung / Installation manual X-AIR-PCASE230V

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE