MFC

Mini Pleat filter cells, type MFC

For large volume flow rates and long filter life

Prefilters or final filters for the separation of fine dust and particulate filters for the most critical requirements in ventilation and air conditioning systems

Filter groups ISO ePM10, ISO ePM1 (fine dust filter) and EPA, HEPA (particulate filter)
Performance data tested according to ISO 16890, or to EN 1822-1 and ISO 29463-2 to ISO 29463-5
Eurovent Certification for fine dust filters
Filter media for special requirements, glass fibre papers with spacers made of thermoplastic hot-melt adhesive
Low initial differential pressure due to ideal pleat position and largest possible filter area
Compact V-design with low installation depths
Installation options in HEPA particulate filter housings for duct installation of the types KSF, KSFS and DCA
Meets the hygiene requirements of VDI 6022

v2.23.1.162

General information

Application

Mini Pleat filter cell type for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems with large volume flow rates and the requirement for long filter life
Fine dust filter: Prefilter or final filter for the separation of fine dust in ventilation and air conditioning systems.
Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as production, research, medicine, pharmaceuticals industry, and nuclear engineering

Special characteristics

Leak test as standard for all HEPA filters of filter classes H13, H14

Classification

Eurovent Certification for fine dust filters
Hygiene Conformity

Nominal sizes

B × H × D [mm]

Filter classes

Filter groups

ISO ePM10 acc. to ISO 16890
ISO ePM1 acc. to ISO 16890
EPA according to EN 1822
HEPA according to EN 1822

Filter classes

ePM10 55 %
ePM1 60 %
ePM1 90 %
E11
H13
H14

Options

V: Increased volume flow rate
FNU: Flat profile seal on the upstream side
FND: Flat profile seal on the downstream side
TGU: Test groove seal on the upstream side (only for filter classes H13, H14)
WS: Without seal
OT: Oil mist test (only for filter classes H13, H14)
OTC: Oil mist test with certificate (only for filter classes H13, H14)

Construction

GAL: Frame made of galvanised steel
STA: Frame made of stainless steel

Useful additions

HEPA filter housing for duct installation available as a single unit (KSF, KSFS, DCA) or as a system combination (KSFSSP)

Construction features

Compact V-design
Circumferential flat profile seal on the upstream side
Versions optionally with a test groove seal (filter classes H13, H14) on the upstream side. The flat profile seal can also be arranged on the downstream side

Material and surfaces

Filter media made of high-quality, wet-strength glass fibre papers, pleated
Spacers provide a uniform spacing of the pleats
Sealing compound made of permanently elastic two-component polyurethane adhesive
Frame optionally made of stainless steel

Standards and guidelines

Tested according to ISO 16890; International standard for general ventilation and air conditioning; classification of separation efficiency based on the measured fractional separation efficiency, which is processed into a reporting system for the fine dust separation efficiency (ePM)
For fine dust filters, the fractional separation efficiency of a certain size range is determined by aerosols (DEHS and KCl)
Depending on the test values, the filters are classified into filter groups ISO ePM10 and ISO ePM1
Testing of particulate filters to EN 1822-1 and ISO 29463-2 up to ISO 29463-5 (EPA, HEPA and ULPA filters): Standards for testing of filtration performance in the factory, based on particle counting method using a liquid test aerosol
Uniform classification of particulate filters according to separation efficiency, using a test aerosol with an average particle size within the minimum separation efficiency (MPPS)
Particulate filters are classified into the filter groups EPA (filter classes E10, E11, E12), HEPA (filter classes H13, H14) and ULPA (filter classes U15, U16, U17), according to the values determined for local separation efficiency and integral separation efficiency.
Hygiene conformity in accordance with VDI 6022, VDI 3803, DIN 1946 Part 4, ÖNORM H 6020, SWKI VA 104-01 and WKI 99-3 as well as EN 16798

Technical information

Fractional efficiency ePM10 [%] to ISO 16890	55	–	–
Fractional efficiency ePM1 [%] to ISO 16890	–	60	90
Maximum operating temperature [°C]	80	80	80
Maximum relative humidity [%]	100	100	100

Filter class according to EN 1822	E11	H13	H14
Efficiency [%] according to EN 1822	> 95	> 99.95	> 99.995
Maximum operating temperature [°C]	80	80	80
Maximum relative humidity [%]	100	100	100

Specification text

Mini Pleat filter cells MFC for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. Used as fine dust filters, prefilters or final filters in AHU units; or as particulate filters, main or final filters for highest requirements of air purity and sterility, in areas such as industry, research, medicine, pharmaceuticals, and nuclear technology. Low installation depth due to compact V-design, for systems with high volume flow rates and long filter service lives. Filter media made of high-quality, wet-strength glass fibre papers, with spacers. Optimum pleat position and largest possible filter area allow low initial differential pressures. Mini Pleat filter cells available in usual market sizes, filter groups ISO ePM10, ISO ePM1 (fine dust filters) and EPA, HEPA (particulate filters). Mini pleat filter cells are equipped with a circumferential flat profile seal on the upstream side as standard. Optionally available with test groove seal on the upstream side. Mini Pleat filter cells used as fine dust filters are certified by Eurovent

Special features

Leak test as standard for all HEPA filters of filter classes H13, H14

Materials and surfaces

Filter media made of high-quality, wet-strength glass fibre papers, pleated
Spacers provide a uniform spacing of the pleats
Sealing compound made of permanently elastic two-component polyurethane adhesive
Frame optionally made of stainless steel

Construction

GAL: Frame made of galvanised steel
STA: Frame made of stainless steel

Sizing data

Filter group [ISO 16890]
Separation efficiency [%]
Filter class [EN 1822]
Volume flow rate [m³/h]
Initial differential pressure [Pa]
Nominal size [mm]


MFC	–	H13	–		–	GAL	/	610 × 610 × 292	/	S	/	FNU	/	OT
\|		\|		\|		\|		\|		\|		\|		\|
1		2		3		4		5		6		7		8

1 Type
MFC Mini Pleat filter cell

2 Classification
ePM1 Fractional efficiency ePM1 according to ISO 16890
ePM10 Fractional efficiency ePM10 according to ISO 16890
E11 Filter class E11 according to EN 1822
H13 Filter class H13 according to EN 1822
H14 Filter class H14 according to EN 1822

3 Separation efficiency
Specify separation efficiency [%] according to ISO 16890 (not for E11, H13, H14)

4 Construction
GAL Frame made of galvanised sheet steel
STA Frame made of stainless steel

5 Nominal size [mm]
Width × height × depth

Width and depth cannot be changed

Height
287, 490, 592 or 305, 610, 762

6 Category Volume flow rate
S Standard
M medium
X high

7 Seal
WS without seal
FNU Flat seal on the upstream side
TGU Test groove seal on the upstream side
FND Flat seal on the downstream side

8 Testing
No registration: without leakage test
OT Oil mist test (only H13, H14)
OTC Oil mist test with certificate (only H13, H14)

Order example: MFC-H13-GAL/610×610×292/S/FNU/OT

Type	MFC – Mini Pleat filter cell
Classification	Filter class H13 according to EN 1822
Construction variant	Frame made of galvanised sheet steel
Nominal size [mm]	Width 610, height 610, depth 292
Seal	Flat seal on the upstream side
Testing	Oil mist test
Category Volume flow rate	Standard

Downloads

product information

Product data sheet MFC

MFC_PD_2024_10_22_DE_en Product data sheet 180 KB pdf

certificates

Declaration of hygiene conformity Type MFC

MFC_HC_2024_05_DE_en Hygiene certificate 2,5 MB pdf
Environmental product declaration MFC

MFC_EPD_2024_11_DE_en Environmental Product Declaration 1,2 MB pdf
Eurovent Certificate

certificationDiplomaAll20240725101807 Eurovent Certificate 200 KB pdf
Non-CE Manufacturer's statement MFC

MFC_NotCE_2022_02_08_13_40_08_DE_en Certificate 2,5 MB pdf

operation manuals

Installation and maintenance manual MFC

MFC_IM_A00000094984_V1_2022_10_GB_en Installation and maintenance manual 170 KB pdf

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Your recommendation has been sent and should arrive shortly.

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

STATISTICS AND WEBSITE ANALYSIS

These cookies make it possible to collect data for statistics and analysis so that TROX can measure the performance of the websites visited, identify technical problems and find starting points for optimisation. They may be set by us or by third parties whose services we use on our sites. Users also help to identify, for example, which pages are used most frequently or only rarely or how people navigate between web pages. All information used by third parties is aggregated and anonymised.

CONVENIENCE AND PERSONALISATION

These cookies are used to facilitate the operation of the website. Based on a previous product search, for example, we conveniently provide related content and suggestions when you visit again. We also display content tailored to websites visited or products purchased. This category also controls whether or not videos from the Vimeo platform are automatically loaded.

FOR THE BEST TROX EXPERIENCE

Privacy

MFC

For large volume flow rates and long filter life

General information

Technical information

Downloads

product information

Product data sheet MFC

certificates

Declaration of hygiene conformity Type MFC

Environmental product declaration MFC

Eurovent Certificate

Non-CE Manufacturer's statement MFC

operation manuals

Installation and maintenance manual MFC

TROX Services

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE