MFP_img_17psd.png
Mini Pleat filter panels, type MFP, construction ALZ

MFP_img_17psd.png
VDI6022_gs_01ai.png
label-ECC-air-filters_MFEjpg.jpg

MFP  

FOR THE MOST DEMANDING REQUIREMENTS OF AIR CLEANLINESS AND STERILITY


Prefilters or final filters for the separation of fine dust and suspended particles. Used for industrial, research, medical, pharmaceutical, and nuclear engineering applications.

  • Filter groups ISO ePM10, ISO ePM1 (fine dust filter) and EPA, HEPA (particulate filter)
  • Performance data tested according to ISO 16890 or  to EN 1822-1 and ISO 29463-2 to ISO 29463-5
  • Eurovent certification for fine dust filters
  • Meets the hygiene requirements of VDI 6022
  • Filter media for special requirements, glass fibre papers with spacers made of thermoplastic hot-melt adhesive
  • Low initial differential pressure due to ideal pleat position and largest possible filter area
  • Perfect adjustment to individual requirements due to different pleat depths, filter frame made of various materials
  • Fitting into ceiling mounted or wall mounted particulate filters (types TFC, TFW, TFM, TFP), ducted particulate filters (types KSF, KSFS), duct casings for particulate filters (type DCA), or operating theatre ceilings
  • Automatic filter scan test for all filters from filter class H14

 

 

 


Product successfully added to cart

General information

Application

  • Mini pleat filter panel type MFP for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses, bacteria from the supply and extract air in ventilation and air-conditioning systems with large volume flow rates and long filter service lives.

  • Fine dust filter: Prefilter or final filter for the separation of fine dust in ventilation and air conditioning systems.
  • Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as production, research, medicine, pharmaceuticals industry, and nuclear engineering


Special characteristics

  • Leakage test is standard for all particulate filters of classes H13, H14


Classification

  • Eurovent certification for fine dust filters
  • Hygiene conformity for constructions ALN, ALZ, ALY, ALU, ALV



Nominal sizes

  • B × H × D [mm]


Options

  • FT: Pleat depth
  • PU: Protection grid on the upstream side
  • PD: Protection grid on the downstream side
  • PB: Protection grid on both sides
  • FNU: Flat seal on the upstream side
  • FND: Flat seal on the downstream side
  • FNB: Flat seal on both sides
  • TGU: Test groove seal on the upstream side (only for filter classes H13, H14)
  • CSU: Continuous seal on the upstream side
  • CSD: Continuous seal on the downstream side
  • CSB: Continuous seal on both sides
  • GPU: Fluid seal (only for ALU/ALV)
  • WS: Without seal
  • OT: Oil mist test (only for filter classes H13, H14)
  • OTC: Oil mist test with certificate (only for filter classes H13, H14)
  • ST: Scan test (only for filter classes H13, H14)


Construction

  • PLA: Frame made of plastic (depth 48, 96 and 150 mm)
  • MDFF: Frame made of MDF, with header frame (depth 60 mm)
  • MDF: Frame made of MDF (depth 60, 78, 150 and 292 mm)
  • GAL: Frame made of galvanised steel (depth 60, 150 and 292 mm)
  • STA: Frame made of stainless steel (depth 60, 150 and 292 mm)
  • ALN: Frame made of extruded aluminium sections (depth 30 mm)
  • ALZ: Frame made of extruded aluminium sections (depth 78 mm)
  • ALY: Frame made of extruded aluminium sections (depth 150 mm)
  • ALU: Frame made of extruded aluminium sections (depth 91 mm)
  • ALV: Frame made of extruded aluminium sections (depth 85 mm)


Useful additions

  • Filter wall (SIF)
  • Universal casing (UCA)
  • Ducted particulate filter, available as one unit (KSF, KSFS) or as a filter unit system (KSFSSP)
  • Duct casing for particulate filters (DCA)
  • Ceiling mounted particulate filter (TFC)
  • Wall mounted particulate filter (TFW)
  • Particulate filter module (TFM)
  • Pharmaceutical clean room terminal filter (TFP)


Construction features

  • Perimeter flat seal on the upstream side for constructions MDF, GAL, STA, ALN, ALZ and ALY
  • Some constructions with optional foamed continuous seal or with a test groove seal (filter classes H13, H14) on the upstream side; the flat section or continuous seal can also be fitted on the downstream side or on both sides
  • As standard, constructions ALU/ALV are fitted with a fluid seal
  • Protection grid made of expanded metal, can be fitted on the downstream or upstream side or both sides as required



Materials and surfaces

  • Filter media made of high-quality, wet-strength glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Sealing compound made of permanently elastic two-component polyurethane adhesive
  • Frame made of either plastic, MDF, galvanised sheet steel, stainless steel, or extruded aluminium sections




Standards and guidelines

  • Tested according to ISO 16890; International standard for general ventilation and air conditioning; classification of separation efficiency based on the measured fractional separation efficiency, which is processed into a reporting system for the fine dust separation efficiency (ePM)

  • For fine dust filters, the fractional separation efficiency of a certain size range is determined by aerosols (DEHS and KCl)

  • Depending on the test values, the filters are classified into filter groups ISO ePM10 and ISO ePM1

  • Testing of particulate filters according to EN 1822-1 and ISO 29463-2 to ISO 29463-5 (EPA, HEPA and ULPA particulate filters): Standards for testing the filtration performance in the factory, based on particle counting methods using a liquid test aerosol.

  • Uniform classification of particulate filters according to separation efficiency, using a test aerosol with an average particle size within the minimum separation efficiency (MPPS)

  • Particulate filters are classified into the filter groups EPA (filter classes E10, E11, E12), HEPA (filter classes H13, H14) and ULPA (filter classes U15, U16, U17), according to the values determined for local separation efficiency and integral separation efficiency.

  • Hygienic conformity for versions ALN, ALZ, ALY, ALU, ALV: VDI 6022, VDI 3803, DIN 1946 Part 4, ÖNORM H 6020, SWKI VA 104-01 and SWKI 99-3 as well as EN 16798


Technical information

Technical data, Specification text, Order code

  • Specification text
  • Order code

Fractional efficiency ePM10 [%] to ISO 16890

55


Fractional efficiency ePM1 [%] to ISO 168906590
Initial differential pressure [Pa] at nominal volume flow rate90110150
Final differential pressure [Pa]450450450
Maximum operating temperature [°C]808080
Maximum relative humidity [%]100100100

 


Filter class according to EN 1822E11H13H14
Efficiency [%] according to EN 1822> 95> 99.95> 99.995
Initial differential pressure [Pa] at nominal volume flow rate125250120/140
Final differential pressure [Pa]300600300
Maximum operating temperature [°C]808080
Maximum relative humidity [%]100100100

​Dimensions

  • Ergänzende Produktinformation

Downloads

product information

certificates

operation manuals

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265