FHD

① Nominal size ② Nominal volume flow rate ③ Initial differential pressure ④ Filter area ⑤ Weight

Specification text

Mini Pleat filter panels with hood, type FHD, for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in clean room systems with controlled air cleanliness and airflow. Use as particulate filters, i.e. main or final filters, for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering. Mini Pleat filter panels with hood, consisting of an extruded aluminium frame, filter medium, and a hood with top entry circular spigot; filter media made from high-quality, moisture-resistant glass fibre papers with spacers made of thermoplastic hot-melt adhesive. Low initial differential pressure due to ideal pleat position and largest possible filter area. Filter hood available in various sizes and the usual grid sizes, filter classes E11, H13, H14 and U15. Optional flat seal and protection grid on the downstream side. Choice of expanded metal, powder-coated (RAL 9010) protection grid, stainless steel protection grid, or perforated plate made of stainless steel or aluminium. Mini Pleat filter panels from filter class H14 are subjected to an automatic filter scan test. Mini Pleat filter panels with hood FHD hygienically conform to VDI 6022.

Special characteristics

• Ideal pleat geometry of the filter medium
• Low-turbulence airflow on the downstream side
• Leakage test, standard for all particulate filters of classes H13, H14, U15

Materials and surfaces

• Filter media made of high-quality, moisture-resistant glassfibre papers, pleated
• Spacers provide a uniform spacing of the pleats
• Joint sealing compound made of permanently elastic two-component polyurethane adhesive
• Frame made from extruded aluminium sections
• Hood with spigot made of galvanised sheet steel

Construction

• Without centre mullion, spigot with fixed baffle plate
• D: Centre mullion with pressure measurement point on the downstream side, spigot with fixed baffle plate
• R: Centre mullion with pressure measurement point on the downstream side, spigot with adjustable baffle plate for volume flow rate balancing
• V: Centre mullion with pressure measurement point on the downstream side, spigot with damper blade for volume flow rate balancing

Sizing data

• Filter class [EN 1822]
• Volume flow rate [m³/h]
• Initial differential pressure [Pa]
• Nominal size [mm]

FHD–H13–D/1220×610×140×313/PD/FND/ST
Filter class H13 Particulate filter according to EN 1822
Construction centre mullion with pressure measurement point on the downstream side, spigot with fixed baffle plate
Nominal size 1220 × 610 × 140 mm
Spigot diameter 313 mm
Protection grid downstream side
Seal Flat seal on the downstream side
Test scan test