X-CUBE SCHOOLAIR-V

SCHOOLAIR-V-ZAB/SEK

Tested to VDI 6022

Conforms to VDI 6022

Levelling foot

SCHOOLAIR-V, filter

Filter change

Kreuz-Gegenstrom Wärmerückgewinner

Kreuz-Gegenstrom-Wärmerückgewinner

X-CUBE SCHOOLAIR-V

Supply and extract air unit with heat exchanger and heat recovery unit, secondary air option, for vertical installation on an external wall, e.g. adjacent to a window

Ready-to-operate decentralised ventilation unit that provides good comfort levels, used for the ventilation and extract ventilation of rooms such as classrooms in schools

Acoustically optimised EC fans with low specific fan powers, SFP-1 according to EN 13779
Recuperative plate heat exchanger (air/air), including bypass damper with electric actuator (open-close)
Alternatively: Rotary heat exchanger for heat recovery (air/air), including bypass with electric actuator (modulating or open-close)
Heat exchanger for heating and cooling as 2-pipe or 4-pipe system
Unit base of approx. 0.24 m²
Easy filter change, no tools required
Condensate drip tray with or without condensate drain
Motorised shut-off dampers, normally closed (NC)
Automatic switching to secondary air mode (based on air quality)

Optional equipment and accessories

Modular control system FSL-CONTROL II, specially for decentralised ventilation systems
Demand-based fresh air volume, free cooling and night purge, depending on control strategy
Variable heat recovery
Powder-coated RAL 9005 (black)

Application

Application

Ventilation and extract ventilation of rooms with a depth up to approx. 6 m
2-pipe or 4-pipe heat exchangers enable good comfort levels
Inducing displacement flow
Energy-efficient solution since water is used for heating and cooling
For new buildings, refurbishment projects and revitalisation projects
Vertical installation on the façade system or an external wall
Typical applications include classrooms in schools, playrooms in daycare facilities, meeting rooms and offices with a high air change rate

Special characteristics

Decentralised ventilation unit for high volume flow rates
Motorised shut-off dampers for fresh air and exhaust air, normally closed (NC) in order to prevent uncontrolled airflows
Demand-based ventilation and extract ventilation is possible by means of monitoring the room air quality and with dedicated control equipment
The type of heat recovery unit depends on the unit variant: cross flow plate heat exchanger, cross counter flow plate heat exchanger including bypass damper with electric actuator (open-close or modulating) or rotary heat exchanger
Heat exchanger as 2-pipe or 4-pipe system, with G½" union nuts and flat seals
Meets the hygiene requirements of VDI 6022
Filter class: F7 for fresh air, G3 for extract air
Easy filter change with quick release fasteners, no tools required
Condensate drip tray with or without condensate drain
Compact construction, hence particularly suitable for refurbishment projects
Automatic switching to secondary air mode (only with an air quality sensor) if the room air quality (measured with the integral VOC sensor, for example) is between the previously defined range. The unit always starts in secondary air mode, which is more energy efficient.
Depending on the unit, an enthalpy heat recovery unit may be used

Nominal sizes

SCHOOLAIR-V 2-pipe system: 397 × 2160 × 359 mm (B × H × T)
SCHOOLAIR-V 4-pipe system: 397 × 2350 × 359 mm (B × H × T)
SCHOOLAIR-V-1800 2-pipe system, 4-pipe system: 600 × 1800 × 359 mm (B × H × T)
SCHOOLAIR-V-HE 2-pipe system, 4-pipe system: 600 × 2000 × 408 mm (B × H × T)
SCHOOLAIR-V-HV 2-pipe system, 4-pipe system: 600 × 2200 × 408 mm (B × H × T)

Technical information

Function, Technical Data, Specification Text, Order Code

Schematic illustration of SCHOOLAIR-V

① Cover of G3 coarse dust filter chamber
② Cover of F7 fine dust filter chamber
③ Casing
④ Cover of control equipment
⑤ Heat exchanger
⑥ Supply air temperature sensor (optional)
⑦ Fresh air opening with fresh air temperature sensor (optional)
⑧ Exhaust air opening
⑨ Mounting bracket (sliding)
⑩ Extract air opening

Functional description

Decentralised supply and extract air units for room ventilation and for dissipating cooling loads and heat loads.

An EC centrifugal fan takes in the fresh air which then flows through the motorised shut-off damper and the F7 filter.

Once the fresh air has passed the fan, it flows through the heat exchanger for heat recovery; it is possible to bypass the heat exchanger in order to pect it, or when it is sensible with regard to energy efficiency.

If necessary, the air is heated or cooled by the heat exchanger before it is discharged to the room as a displacement flow.

The extract air first passes a G3 filter, then flows through the heat exchanger, the extract air fan and the motorised shut-off damper before it is discharged to the outside as exhaust air.

If the room air quality is good, the unit can be operated in secondary mode only.

Width	397 mm (2-pipe or 4-pipe), 600 mm (2-pipe or 4-pipe, 1800, HE and HV)
Height	1800 mm (2-pipe or 4-pipe, 1800 version), 2000 mm (HE version), 2160 mm (2-pipe), 2200 mm (HV version), 2350 mm (4-pipe)
Depth	359 mm (2-pipe or 4-pipe, 1800 version) 408 mm (2-pipe or 4-pipe HE and HV versions)
Fresh air flow rate	Up to 500 m³ /h
Supply air flow rate	Up to 500 m³ /h
Cooling capacity	Up to 1685 W
Heating capacity	Up to 6020 W
Max. operating pressure, water side	6 bar
Max. operating temperature	75 °C
Sound power level	31 – 50 dB(A)
Supply voltage	230 V AC ±10 %, 50/60 Hz
Weight	From 80 kg

Special features

Dezentrales Lüftungsgerät mit hohen Volumenströmen
Motorisierte Absperrklappen für Außen- und Fortluft, stromlos geschlossen, um unkontrollierte Luftströmungen und Verschleppung von Rauch zu verhindern
Bedarfsabhängige Be- und Entlüftung durch Überwachung der Raumluftqualität mit entsprechender Regelung möglich
Verwendung zur bedarfsabhängigen Lüftung
Ganzjährige rekuperative Wärmerückgewinnung mit motorisch betriebenem Bypass oder Rotationswärmeübertrager mit Feuchterückgewinnung
Wärmeübertrager als 2- oder 4-Leiter-System mit Überwürfen G½”, flachdichtend
Entspricht den hygienischen Anforderungen der VDI 6022
Filterklasse: Außenluft ePM1 60 % und Abluft ISO Coarse⁶⁰
Werkzeugloser Filterwechsel mit Schnellverschlüssen
Kondensatwanne mit Kondensatanschluss
Durch die kompakte Bauweise für Sanierungsprojekte besonders gut geeignet

Construction features

Pulverbeschichtet RAL 9005, schwarz

Technical data

Breite: 397 mm (2- bzw. 4-Leiter), 600 mm (2- bzw. 4-Leiter, 1800, HE und HV)
Höhe: 1800 mm (2- bzw. 4-Leiter, 1800-Version), 2000 mm (HE-Version), 2160 mm (2-Leiter), 2200 mm (HV-Version), 2350 mm (4-Leiter)
Tiefe: 359 mm (2- bzw. 4-Leiter, 1800-Version) 408 mm (2- bzw. 4-Leiter HE- und HV-Version)
Außenluftvolumenstrom: Bis 500 m³ /h
Zuluftvolumenstrom: Bis 500 m³ /h
Kühlleistung: Bis 1685 W
Heizleistung: Bis 6020 W
Maximaler Betriebsdruck: 6 bar
Maximale Betriebstemperatur: 75 °C
Schallleistungspegel: 31 – 50 dB(A)
Versorgungsspannung: 230 V AC ±10 %, 50/60 Hz
Gewicht: Ab 80 kg
Elektrische Dimensionierung: SCHOOLAIR-V-2L: 136 VA, SCHOOLAIR-V-4L: 117 VA, SCHOOLAIR-V-1800: 141 VA, SCHOOLAIR-V-HE: 208 VA, SCHOOLAIR-V-HV: 495 VA
Leistungsaufnahme bei Nennluftmenge: SCHOOLAIR-V-2L: 44 W, SCHOOLAIR-V-4L: 45 W, SCHOOLAIR-V-1800: 46 W, SCHOOLAIR-V-HE: 42 W, SCHOOLAIR-V-HV: 147 W

SA-V

–

397 × 2350 × 359

–

0.4

–

0.4

1 TypeSA-V vertical decentralised ventilation unit X-CUBE/SCHOOLAIR-V 2 VariantNo entry: StandardHE high degree of heat recoveryHV high volume flow rate and rotary heat recovery unit 3 Heat exchanger2 2-pipe4 4-pipeEH Electric heating coil (only with variant HV) 4 ConstructionKO without condensate drainKM with condensate drain (SCHOOLAIR-V, SCHOOLAIR-V-1800, SCHOOLAIR-V-HV)KR with condensate drain, extract air opening on the right when seen from the room (SCHOOLAIR-V-HE)KL with condensate drain, extract air opening on the left when seen from the room (SCHOOLAIR-V-HE) 5 Dimensions [mm]Width × height × depth397 × 2160 × 359 (with heat exchanger 2)397 × 2350 × 359 (with heat exchanger 4)604 × 1800 × 370 (2-pipe or 4-pipe, version 1800)600 × 2000 × 408 (2-, 4-pipe, HE version)605 × 2200 × 413 (2-, or 4-pipe, HV version) 6 Control systemOR without control systemC3 with FSL-CONTROL III 7 Control functionMA MasterSL Slave 8 Real time clockOnly with control function MANo entry: without real time clockT with real time clock 9 InterfaceNo entry: noneMT with Modbus TCPMR with Modbus RTU (only with control function MA)BI with BACnet IPBM with BACnet MS/TP (only with control function MA) 10 Air quality sensorOnly with control function MANo entry: without air quality sensorC with CO₂-sensorV with VOC sensor 11 Supply air temperature sensorZ with supply air temperature sensor 12 Outdoor air temperature sensorOnly with control function MANo entry: without outdoor air temperature sensorA with outdoor air temperature sensor 13 Heating valve With heat exchanger '2' onlyHV with heating valve 14 Lockshield – heating circuitR with lockshield 15 kVS value – heating valve 0.25 Straight-way valve0.40 Straight-way valve0.63 Straight-way valve1.00 Straight-way valveF0.50 Pressure-independent control valve 16 Cooling valveWith heat exchanger '4' onlyKV with cooling valve 17 Lockshield – cooling circuitR with lockshield 18 kVS value – cooling valve0.25 Straight-way valve0.40 Straight-way valve0.63 Straight-way valve1.00 Straight-way valveF0.50 Pressure-independent control valve

Variants, Produktdetails, Dimentions

SCHOOLAIR-V-1800

Installation and commissioning

Vertical installation (floor standing) on the façade system or an external wall, e.g. adjacent to a window
Level adjustment using the 4 levelling feet (+40 mm)
1 adjustable mounting bracket to screw-fix the unit to the wall
Weather pection for the fresh air and exhaust air openings to be provided by others
The fresh air connection is provided by two ventilation openings in the façade system or external wall (to be provided by others), preferably sloping towards the outside
Free area of ventilation openings: 0.05 m² for each opening
Installation and connections to be performed by others; fixing, connection and sealing material to be provided by others
The water flow and return connections are on the right-hand side of the unit when seen from the room
Vents and drainage by others
The electrical connection is on the lower left when seen from the room
The under sill trim must not obstruct installation or deinstallation of the unit or maintenance access on the front of the unit

SCHOOLAIR-V-2350 4L FSL-CONTROL II

Downloads

product information

Product data sheet Type X-CUBE SCHOOLAIR-V

PD_2018_02_SCHOOLAIR-V_DE_en Product data sheet 2,8 MB pdf
SCHOOLAIR-V-2L_BIM 3D

280 KB zip
SCHOOLAIR-V-4L_BIM 3D

310 KB zip

certificates

Conformity declaration Type SCHOOLAIR-V

Conformity declaration 54 KB pdf
Conformity declaration Decentralised ventilation units

Conformity declaration 120 KB pdf
Declaration of hygiene conformity Type SCHOOLAIR-V

X-CUBE-SCHOOLAIR-V-HV_HC_2023_12_12_DE_en Hygiene certificate 660 KB pdf
ErP-product information Type SCHOOLAIR-V

Schoolair-V_ErP_2021_08_DE_en Certificat 190 KB pdf

operation manuals

Installation and configuration manual Type FSL-CONTROL III

FSL-C_III_SM_A00000080125_V1_2020_04_GB_en 4,9 MB pdf
Installation and configuration manual Type FSL‑CONTROL II

SM_2018_04_A00000046303_FSL-CONTROL_II_V6 1,5 MB pdf
Installation and operating manual Type SCHOOLAIR-V

IOM_2020_05_A00000055327_Schoolair-V-x_V5_GB_en Installation and operating manual 2,1 MB pdf
Installation and operating manual FSL / SCHOOLAIR

Installation and operating manual 450 KB pdf

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

X-CUBE SCHOOLAIR-V

Supply and extract air unit with heat exchanger and heat recovery unit, secondary air option, for vertical installation on an external wall, e.g. adjacent to a window

Application

Technical information

Function, Technical Data, Specification Text, Order Code

Variants, Produktdetails, Dimentions

Downloads

product information

Product data sheet Type X-CUBE SCHOOLAIR-V

SCHOOLAIR-V-2L_BIM 3D

SCHOOLAIR-V-4L_BIM 3D

certificates

Conformity declaration Type SCHOOLAIR-V

Conformity declaration Decentralised ventilation units

Declaration of hygiene conformity Type SCHOOLAIR-V

ErP-product information Type SCHOOLAIR-V

operation manuals

Installation and configuration manual Type FSL-CONTROL III

Installation and configuration manual Type FSL‑CONTROL II

Installation and operating manual Type SCHOOLAIR-V

Installation and operating manual FSL / SCHOOLAIR

TROX Services

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE