Application
Motor control module used to control fire dampers, smoke
control dampers, air transfer dampers, duct smoke detectors and multileaf dampersDamper accessories (mounted) | Use | Coding switch |
A00000018487 | Module, unmounted | Position 0 (Normal position) |
ZA07 | Mounted to fire damper | Position 0 (Normal position) |
ZA08 | Mounted to multileaf damper with reversible actuator | Position 1 |
ZA10 | Mounted to fire protection damper or multileaf damper with spring return actuator | Position 0 |
ZA11 | Wired with RM-O-3-D smoke detector | Position 2 |
ZA12 | Mounted to air transfer damper | Position 3 |
Order designation | AS-EM |
Electrical design | 4 inputs/2 outputs |
Output function | PNP transistor |
Supply voltage | 26.5 – 31.6 V DC |
Current consumption, incl. actuator | 450 mA |
lnputs | |
Switching | DC PNP |
Sensor supply | AS-i |
Voltage range | 18 – 30 V DC |
Short-circuit proof | Yes |
Switching level – high signal 1 | 10 |
lnput current high/low | > 7 mA/< 2 mA |
lnput characteristic | lEC 61131-2 Type 2 |
Outputs, PNP | |
Galvanically isolated | No |
Short-circuit proof | Yes |
Current carrying capacity per output | 400 mA per output/400 in total (from AS-i) |
Outputs, relay | |
Galvanically isolated | Yes |
Maximum voltage | 32 V |
Current carrying capacity | 500 mA |
Ambient temperature | –5 to 75 °C |
Protection level, lEC protection class | lP 42 |
AS-i profile | S-7.A.E |
l/O configuration | 7 Hex |
lD code | |
EMC | EN 61000-6-2; EN 61000-6-3 |
Standard description (characteristics)
Life cycle assessment
A life cycle assessment is available for the product series in form of an Environmental Product Declaration (EPD) that has been checked and published by a programme holder.
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
We are here for you
Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265